Drench Showers

Emergency Drench Showers and Safety Eyewash Stations

Eyewash stations, eye/face wash stations, drench showers, and combination showers. 

With a Variety of eye/face washdown bowl and safety shower options, we can find the perfect combination to fit your drench shower needs.

• Halo™ and SpinTec™ Deliver the Most Effective Shower and Eye/Face Washdown
• Exceeds ANSI/ISEA Z358.1 Specifications
• Industry’s Only Self-Draining Design – The Aquaduct™
• Separate Supply and Waste Pipes – Meets CEN and Plumbing Requirements
• Ergonomic Hand Activation Eyewash Paddle – Easy to Reach from Any Direction
• Fully-Assembled and Factory-Tested Eyewash or Eye/Face Wash with Hinged Dust Covers
• Yellow Transparent Plastic and Stainless Steel Bowl covers available

Our portable eyewash station is offered with mounting brackets to easily fit within your existing platform system and provide a wash station near the source of potential hazards.

Standard Combination Drench Shower/Eyewash Units save space and fit easily into any work environment. The shower valve operates quickly by a pull rod with a triangular handle. The shower provides a superior washdown with a more even spray pattern. Halo eyewash, operated by an ergonomic, highly visible push handle, provides effective wash down coverage and spray pattern. Integral strainer reduces debris in the water and also prevents clogging.

EMERGENCY EYEWASHES / SHOWER EQUIPMENT AND THE ANSI/ISEA Z358.1 – 2014 STANDARD

Are you aware that ANSI guidelines state that Eye Wash/Drench Showers need to be located 10 seconds or 55’ from contaminates or hazardous materials? And they should be on the same horizontal plane, with no obstructions? Long or short! And if bottom loading/unloading and additional shower should be located at grade as well.

While ANSI/ISEA Z358.1 is considered a voluntary standard, OSHA often uses it as a guide when inspecting facilities. As a result, this standard has gained significant importance within in the safety industry; and, by not complying with the standard, OSHA may elect to impose site penalties.

In addition, these units must dispense tepid water. Tepid is defined as “A flushing fluid temperature conductive to promoting a minimum 15-minute irrigation period @ 60 to 100 degrees F (16-38 degrees C)”. Generally, temperatures higher than 100 degrees F may cause chemical interactions with the skin and cause further damage, and at 60 degrees and below hypothermia becomes a concern.

“In every industry that handles chemicals and hazardous materials, the proper selection of emergency eyewash stations is critical. The ANSI Z358.1-2014 standard sets forth guidelines for how to properly place these safety equipment products in order to provide maximum protection from chemical exposure.”

With a Variety of eye/face washdown bowl and safety shower options, we can find the perfect combination to fit your drench shower needs. Our portable eyewash station is offered with mounting brackets to easily fit within your existing platform system and provide a wash station near the source of potential hazards.

ANSI guidelines state that an Eye Wash/Drench Showers need to be located 10 seconds or 55’ (16.8m) from contaminants or hazardous materials. Eyewash stations need to be on the same horizontal plane with no obstructions.

Heat Trace Shower

Tempered Water Solutions for safety eye/face washes and drench showers ensure that, in an emergency, your employees will be comfortable during the 15 minute flush of tepid water required by ANSI Z358.1. Consumes energy vs. use energy, no need to worry about hypothermia from freezing cold water or being scalded by water that is too hot. Use energy only while the unit is in use – it’s unnecessary to keep a water tank heated 24/7. Easy to install – just add water and power – only requirements are one electrical connection and a cold water line. Quality is unmatched with premium features that come standard and exceed the specifications of any application.

HALO Eyewash Bowl

The Halo eyewash system offers a high-performance rinsing platform that provides rapid relief to an individual’s eyes that have been injured by chemicals or particulate. The eyewash includes an integral 5.1 GPM (19.2 L) flow control, providing water at a safe velocity while maintaining its effectiveness (exceeds minimum water flow of 0.4 GPM (1.5 L) at 30 PSI (2.0 bar)).

SpinTec™ Showerhead

Standard showerhead is 3.1” (78.7mm) diameter highly visible yellow impact-resistant plastic or optional 10¾” (273mm) diameter corrosion-resistant stainless steel shroud (S19314F). SpinTec drench showerhead features integral 22 GPM (83.3 L) flow control (exceeds

Eyewash/Drench Shower Combination Safety Stations

A multi-purpose emergency drench shower station combines both a drench shower and an eyewash in one unit. This versatile piece of equipment has the capabilities to act as a stand alone drench shower or functioning as an eyewash station with built in DMTX eyewash. Horizontal/Wall-mounted units include features such as makeup water cup sump pump, hose bib connection that opens for additional pressure when needed, bathtub faucet adapter, debris filter which removes impurities from the water flow, and stainless steel construction.

• Several versions available: stations include a 10″ shower head along with a built-in two-head eyewash bowl/outlet of your choice
• Model S90570 features all stainless steel construction
• Models S90510, S90510-2, S90520 & S90570 feature 1″ IPS chrome plated brass stay-open ball valve and Teflon seals – meet ANSI Z358.1 standards
• Models S90520-3 and S90520-4 feature slow self-closing valve with pull chain and ring (shower operates for 10 seconds after chain is released)
• Self-closing valve models do not meet ANSI 358.1 standards

Horizontal/Wall Mounted Emergency Drench Showers

Emergency drench showers are designed to deliver a high volume of water. The 10″ nozzle head, which is 6″ in the front and 4″ in the back, projects straight down from 60″, so that there is sufficient pressure even for overhead use (though we recommend 30 GPM at 30 PSI minimum). They can be mounted full height above the floor or any portion up to 42″. There are two materials available: ABS plastic and stainless steel. If you’re looking for quality and compliance one inch IPS chrome plated brass stay-open ball valve with Teflon seals meet ANSI Z358.1.

• Deliver 30 GPM at 30 PSI, 20″ diameter spray pattern from 60″ above floor level
• Spray heads available in two materials:
  • 10″ circular blue ABS plastic
  • 10″ circular stainless steel
• Models S90243 & S90243-2 feature 1″ IPS chrome plated brass stay-open ball valve and Teflon seals – meet ANSI Z358.1 standards
• Models S90243-3 feature slow self-closing valve with pull chain and ring (shower operates for 10 seconds after chain is released)
• Self-closing valve models do not meet ANSI 358.1 standards

Wall Mounted Eyewash Units

Emergency Drench showers are perfect for any size area. These units are pre-assembled and completely water tested prior to shipment, ensuring they’ll do what they were designed to do with ease. Wall mounting brackets ensure stability in high visibility areas. We offer one of the widest spray patterns on the market, making these ideal for commercial uses as well as residential applications. Wall mounting unit includes heavy duty aluminum wall brackets with corrosion resistant powder coated finish.

• Each spray head has a “flip-top” dust cover and internal flow control
• Filter removes impurities from the water flow
• Bowls available in two materials:
  • 11-1/2″ circular blue ABS plastic
  • 11-1/2″ circular stainless steel
• Completely assembled and water tested prior to shipment
• Meets ANSI Z358.1 Standards

Faucet Mounted Eyewash Units

Whether you work in an area where accidents and injuries are highly likely – like a construction site or plumbing’s hazardous situations – or if there’s ever been an emergency at your home such as natural disasters these units can provide life-saving relief.

• Does not interfere with normal faucet operation
• Two outlet heads are mounted 3″ or 5″ apart and deliver a soft, aerated, and unlimited supply of water
• Heads angle forward and are adjustable to permit full coverage while avoiding splashes
• Furnished with float-off dust covers to protect outlet heads
• Also contains 3 adaptors for installation on most common faucets: 15/16″-27, 13/16″-27, 3/8″ IPS

Hand Held Drench Hose Eyewash Units

The Hand Held Drench Hose Eyewash Units offer an innovative design. The dual purpose unit utilizes a deck flange for hands free eyewashes and removes to be used as a deck hose! Features two spray heads that are mounted side-by-side with “flip-top” dust covers and internal flow control filters which remove impurities from the water flow. This quality, ANSI Z358.1 compliant product features an 8’, 300 PSI reinforced PVC hose meeting safety coding requirements ensuring peace of mind while maintaining professional standards in safety practices.

• Uses deck flange for fixed hands free eyewash
• Removed for use as a deck hose
• Features two spray heads mounted side-by-side
• Each spray head has a “flip-top” dust cover and internal flow control
• Filter removes impurities from the water flow
• Features 8’, 300 PSI reinforced PVC hose
• Meets ANSI Z358.1 Standard

15 Gallon Portable Pressurized Eyewash/Drench Hose Unit

Reduce the risk and provide safety in your workplace with this 15 Gallon Portable Pressurized Eyewash/Drench Hose Unit. This product features a stainless steel tank, two gentle spray heads (one for eyewash outside of the eyes and another to rinse out mouth), and one drench hose head. All pieces are stainless steel or chrome plated brass to reduce rusting over time. The pressure gauge is an excellent tool for monitoring usage levels during inclement weather, heavy use periods, or emergencies when water pressure may drop below optimal levels.

• Stainless steel tank comes with carrying handles, air intake fitting, pressure gauge, and pressure relief valve
• Provides approximately 10 (34 liters) gallons of useable capacity
• Pressure regulator restricts flow to 0.65 GPM (approx. 15 minutes of flow)
• 1/2″ IPS chrome plated brass stay-open ball valve with flag handle
• Drench hose contains a single gentle spray head with flip top dust cover, chrome plated brass squeeze valve, 6’ reinforced PVC hose and stainless steel lever handle
• Weight: 35.6 Ibs. empty, 119 Ibs.
• Complies with ANSI Z358.1 for portable eyewash stations

6 Gallon Portable (Personal) Gravity Feed Eyewash Station

The 6 gallon gravity-flow personal portable eyewash station is a portable, first response eyewash solution. This water stream can be activated by removing the retaining strap from one of two heads that are supplied with dual spray nozzles for maximum effectiveness. The device can also be placed onto flat surfaces such as counter tops and it comes with a bacteriostatic additive to protect against growth of bacteria, fungus, algae and acanthamoeba – which complies with ANSI Z358.1 standards. It weighs 9 pounds empty and is durable due of its epoxy coated steel wall mounting bracket .

• Ideal as a portable, first response eyewash solution
• 3’ drain hose directs waste water into floor drain or storage tank
• Furnished with epoxy coated steel wall mounting bracket
• Comes with 8 oz. bottle of bacteriostatic additive (S90322) which protects against growth of bacteria, fungus, algae and acanthamoeba
• Weight: 9.5 Ibs. empty
• Complies with ANSI Z358.1 for portable personal eyewash stations

16 Gallon Portable Gravity Feed Eyewash Station

Keep your work site, construction site, or any other area of high traffic safe with the 16 Gallon Portable Gravity Feed Eyewash Station. For maximum effectiveness, this 16 gallon portable eyewash has dual spray heads that release a gentle spray of water at eye level.

Complies with ANSI Z358.1 for portable eyewash stations

Water is fed through dual spray heads for maximum effectiveness

Delivers over 14 gallons (53 litres) of water over a 15 minute period

Heavy wall construction with reinforced ribs ensures strength and durability

Integrated full flow nozzle delivers a gentle spray of water

Waste water is directed through drain opening in tank basin

3’ drain hose directs waste water into floor drain or storage tank

Furnished with steel wall mounting bracket

Can also be placed on flat surfaces such as counter tops

Comes with 8 oz. bottle of bacteriostatic additive (S90322) which protects against the growth of bacteria, fungus, algae and acanthamoeba

Weight: 13 Ibs. empty, 146 Ibs.