Tenant Storage Locker Units

WireCrafters RapidWire line of all-steel welded wire Tenant Storage Locker Units are an ideal way to secure resident’s personal items in multi-family building common storage areas.

Our welded mesh locker construction is strong and secure, and gives installers more flexibility to custom fit and professionally finish storage areas, while eliminating clutter and efficiently utilizing available space. Most condominium buildings can recoup the project cost in under twelve months by renting storage lockers to tenants at typical rates.

The lockers are made of 10 gauge wire in a 2″ x 2″ square welded wire mesh. This mesh is welded into a 1 1/4″ x 1 1/4″ x 13 gauge rolled formed angle. The open-but-secure design allows existing lighting, ventilation, and fire suppression systems to function effectively throughout the secured storage areas.

Available in Two Styles

Our tenant storage lockers are available in two basic styles: single tier walk-in and double tier.

The most common configuration is the single-tier walk-in type with a 3′- or 4′-wide door, and depth of 3′, 4′, or 5′. The standard height is 7′-6″ high. The single-tier storage locker gives the tenant plenty of storage space for their out-of-season belongings. Our double-tier lockers are typically used in buildings with limited space but a large number of tenants who require additional storage. The width and depth of the double-tier lockers are the same as the single-tier, but the height of each individual locker is 3′-9″, for a combined total height of 7′-6″.

Our lockers come standard with a simple padlock lug and the tenant provides their own padlock. A three-point lock with a built-in keyed cylinder is also available.

Key Driver Cage Features

Let Us Help

We’re happy to provide free design and layout assistance!

Ceiling Panels
Ceiling panels are available if the locker is more than 6″ away from the existing ceiling. These welded wire ceiling panels allow light and ventilation to come through while providing additional security for the lockers.

Back Panels
Back panels made of solid 16 gauge sheet metal or welded wire are also available for lockers that are back to back in the middle of a room or away from a wall. You may also require a back panel when your existing wall is not level or has obstructions.

Shelves, Bottom Panels, and Floor Panels
You can add full and half shelves of 16 gauge solid sheet metal, as well as bottom panels that keep items 3″ above the floor in areas susceptible to water damage.

Designed for On-Site Flexibility
Our modular design makes it easy to layout and install your storage locker project. Doors are pre-hung, hinges are already welded in place, and you need just four bolts to connect a wall panel to a door panel. This assures easy installation and provides for the lowest total cost of ownership. Welded wire may be modified in the field, simplifying installations around obstructions like electrical conduits, heating ducts, and water pipes. Because the wire is welded at every intersection, field modification does not affect the structural integrity of the storage locker panels.

Free design and layout assistance available.